To Next PageTo Next PageHow to fix a Stiga Lawn Mower when the starter motor does not turn?
If the starter motor of your Stiga Lawn Mower doesn't turn, it might be due to an insufficiently charged battery. Try recharging the battery. Another cause may be badly connected battery, so you should check the connections. Also, a blown 5:A fuse could be the reason, in which case you should replace the fuse.
What to do if Stiga Lawn Mower starter motor turns but engine won't start?
If the starter motor turns but the engine won't start on your Stiga Lawn Mower, the fuel tap might be closed; open it. Also, check the fuel level in the tank, as a faulty fuel supply could be the issue. Inspect the fuel filter. Ensure the spark plug cap is securely fitted, as a faulty ignition could prevent starting. Finally, make sure the spark plug electrodes are clean and have the correct gap.
What to do if no electrical function is operational on Stiga P 901 C Lawn Mower?
If no electrical function is operational on your Stiga Lawn Mower, replace the 5:A fuse. Also, ensure that the battery is charged.
Why is the engine performance weak on my Stiga P 901 C Lawn Mower when cutting?
If your Stiga Lawn Mower shows weak engine performance during cutting, it might be because the forward speed is too high relative to the cutting height. Reduce your advancing speed and/or increase the cutting height.
What causes reduced sharpening when cutting with a Stiga P 901 C?
Reduced cutting means sharpening on your Stiga Lawn Mower can be caused by high advancing speed relative to the height of the grass. Reduce advancing speed and/or increase the cutting height. The cutting means assembly may be full of grass, so clean the cutting means assembly.
How to fix irregular cutting on Stiga Lawn Mower?
To address irregular cutting with your Stiga Lawn Mower, check the tyre pressure.
Why Stiga Lawn Mower remains stationary when drive pedal is pressed?
If your Stiga Lawn Mower remains stationary when the drive pedal is pressed while the engine is running, the transmission may be disengaged. Engage the transmission.
General| Brand | Stiga |
|---|---|
| Model | P 901 C Series |
| Category | Lawn Mower |
| Language | English |
Describes the manual's organization, chapters, and sections.
Explains warning, obligation, prohibition, and note symbols used in the manual.
Provides guidance on keeping the manual legible and accessible to the user.
Details the features and specifications of the 2WD ride-on lawnmower model.
Details the features and specifications of the 4WD ride-on lawnmower model.
Defines the proper and intended use of the lawnmower and its attachments.
Lists examples of misuse and the consequences, including warranty invalidation.
Explains hazard, obligation, prohibition, and note symbols on the machine.
Details information found on the machine's identification label.
Identifies and lists the primary parts of the lawnmower with reference to figures.
Emphasizes the importance of reading instructions and becoming familiar with controls.
Outlines essential checks and preparations before operating the machine.
Provides critical safety advice for operating the machine, including slopes and conditions.
Details safety precautions for maintenance, cleaning, and storing the machine.
Lists all parts included with the machine for initial assembly.
Provides instructions for handling, connecting, and charging the machine's battery.
Explains how to adjust and install the steering wheel for proper operation.
Describes the function and positions of the parking brake pedal.
Explains how the drive pedal controls speed and braking.
Details the function of the ignition block for starting and stopping the engine.
Explains how to adjust the cutting height using the electric regulator.
Key safety checks and advice before starting and driving the machine.
Provides instructions and safety warnings for refueling the machine.
Guides on how to check and top up the engine oil before operation.
Detailed procedure for checking, topping up, and changing engine oil.
Instructions for checking and topping up the transmission oil for 4WD models.
Details checks and adjustments required for the steering system.
Covers battery maintenance, charging, and handling precautions.
Explains cleaning and replacement procedures for the engine's air filter.
Details lubrication points and procedures for various machine components.
