Stiga SD 98-108

28EN
Electrical system ......................................... 12 V
Battery .................................................... 18 Ah
Front tyres ....................................... 13 x 5.00-6
or ................................................. 15 x 5.00-6
Rear tyres ....................................... 18 x 8.50-8
Front tyre pressure
tyres 13 x 5.00-6 ................................ 1.5 bar
tyres 15 x 5.00-6 ................................ 1.0 bar
Rear tyre pressure ................................ 1.2 bar
Overall weight ..................... from 160 to 171 kg
Inside turning circle
(minimum diameter of uncut grass)
left side ........................................ 1,4 (1,3) m
Cutting height .......................... from 3 to 8,5 cm
Cutting width .................................. 97 (107) cm
Mechanical transmission
Forward speed (approximate) at 3000 min-1:
in 1st ........................................... 2,2 km/h
in 2nd ......................................... 3,8 km/h
in 3rd .......................................... 5,8 km/h
in 4th .......................................... 6,4 km/h
in 5th .......................................... 9,7 km/h
in Reverse .................................. 2,8 km/h
Hydrostatic transmission
Forward speed (approximate) at 3000 min-1:
in Forward gear ............... from 0 to 8,8 km/h
in Reverse ....................... from 0 to 3,8 km/h
Maximum noise and vibration levels
1)
SD98 SD108
Operator ear noise
pressure level .................. db(A) 83,8 86,3
– Measurement
uncertainty ..................... db(A) 0,3 2,5
Measured acoustic
output level ...................... db(A) 99.4 99.3
– Measurement
uncertainty ................... db(A) 0.3 0.5
Guaranteed acoustic
output level ......................... 100 100
Vibration level
in the driver’s seat ............. m/s
2
0,94 0,80
– Measurement
uncertainty ..................... m/s
2
1,39 1,46
Steering wheel
vibration level .................... m/s
2
3,33 2,44
– Measurement
uncertainty ..................... m/s
2
2,72 1,95
1)
Indicative values: eective values can be found
in the “Declaration of Conformity”.
11. SPECIFICATIONS
871
1068
902
1197 (1320)
1151
1725
I dati tra parentesi (.....) si riferiscono al modello “108”.