9
-
left side.
3.2 REGULATING DEPTH
-
not touch the ground).
the surface and for aerating the ground, collecting
-
-
-
be collected, as long as the rotor is not clogged.
3.3 FITTING THE GRASS-CATCHER
Lift the stone-guard (1) and fasten the grass-catcher (2)
3.4 STARTING
3.5 AERATING AND SCARIFYING THE GROUND
-
-
sults.
-
-
-
3.6 EMPTYING THE GRASS-CATCHER
3.7 WHEN WORK IS FINISHED
-
IMPORTANT If the motor stops because it is overheated
while working, you must wait about 5 minutes before re-
starting it.
4. ROUTINE MAINTENANCE
IMPORTANT Routine and accurate maintenance is essen-
tial in maintaining original machine safety and performance
levels.
Store the machine in a dry place.
3) Avoid using petrol or solvents on the plastic parts of the
petrol or solvents.
4.1 ROTOR MAINTENANCE
-
-
at point 3.1.
indicated on the chart on page 2 should be used on this
To Next Page
Loading...
