To Next PageTo Next PageWhy is my Stiga TC 102 Lawn Mower engine weak when cutting?
If you experience weak engine performance during cutting, it may be because the forward speed is too high in relation to the cutting height. Reduce the forward speed and/or raise the cutting height.
Why does my Stiga TC 102 Lawn Mower engine stop when I engage the cutting device?
If the engine stops when the cutting device is engaged, it could be that the engage is not enabled. Check that all starting conditions are met.
What should I do if the oil light comes on while using my Stiga Lawn Mower?
If the oil indicator light switches on during operation, it indicates engine lubrication problems. Turn the key to the “STOP” position immediately and top-up the oil level.
Why does my Stiga TC 102 Lawn Mower stay still when I press the drive pedal?
If the machine remains stationary when the drive pedal is pressed, it could be because the release lever is in the gear disengagement position. Return it to the gear engaged position.
General| Brand | Stiga |
|---|---|
| Model | TC 102 Series |
| Category | Lawn Mower |
| Language | English |
Advises operators to familiarize themselves with controls, proper use, and emergency stops.
Outlines necessary preparations, including personal protective equipment (PPE).
Covers safe operation practices, work area checks, fuel handling, and general behavior.
Emphasizes regular maintenance, use of correct parts, and fire risk reduction.
Describes the ride-on mower, its components, intended uses, and improper usage.
Explains the meaning of various safety symbols found on the machine.
Identifies and describes the primary functional components of the machine.
Details the procedure for installing and connecting the machine's battery.
Explains the function and operation of the brake pedal.
Describes the forward gear pedal for traction and speed control.
Details the reverse gear pedal for traction and speed control.
Explains the dual position command for engaging/disengaging hydrostatic drive.
Describes the three positions of the key ignition switch for starting and stopping.
Explains how to regulate engine speed using the throttle control.
Details the operation of the parking brake lever.
Describes how to engage and disengage the cutting device using the clutch.
Details methods for adjusting the cutting unit height using levers and knobs.
Describes the cruise control system for maintaining forward speed.
Describes the indicators and acoustic signals for Type "I" display systems.
Details pre-operation checks, including fuel/oil, seat adjustment, and tyre pressure.
Outlines preparation steps for different mowing methods: collection, rear discharge, mulching.
Lists essential safety checks to perform before each use of the machine.
Provides crucial safety advice for operating the machine on sloped terrain.
Step-by-step guide for starting the machine's engine.
Covers basic machine operation, including forward movement and braking.
Details the procedure for cutting grass, including speed and height adjustments.
Provides instructions on how to properly stop the machine.
Details procedures and precautions for refueling and emptying the fuel tank.
Explains how to check, top up, and drain the engine oil.
Advises contacting authorized service for specific malfunctions.
Provides steps for preparing and changing the machine's wheels.
