Stiga Tornado 7108e - USING THE MACHINE; PRELIMINARY OPERATIONS; SAFETY CHECKS

EN - 20
7. USING THE MACHINE
WARNING



7.1 PRELIMINARY OPERATIONS



7.1.1 Checking the battery


after purchase (chap. 8.2.2).


7.1.2 Seat adjustment
To change the position of the seat, loosen

the seat along the slots on the support.


7.1.3 Tyre pressure



1. 
2. 

3. Adjust the pressure according to the values

7.1.4 Preparing the machine
before starting work
NOTE




a. Prepare the machine for cutting and
lateral grass discharge (for models with
side discharge only):




b. Pre-set for cutting and chopping grass in the





the right support as a lateral support.

of the grass catcher opening is

c. Pre-set for cutting and chopping grass in the


See par. 5.8.
d. Pre-set for grass cutting and rear grass

rear grass catcher)

grass catcher, a rear discharge guard



in the instructions provided.
e. Pre-set for cutting and chopping grass


 
16.1). This has to be attached to the rear
plate as indicated in the instructions.
7.1.5 Positioning the anti-scalping wheels





7.2 SAFETY CHECKS

ensure that the results correspond
to those outlined in the tables.