Stihl 410 - Wheel Types and Usage; Usage and Suitability

TS 410, TS 420
English
13
The proper selection and use of
composite resin cutting wheels ensures
economical use and avoids accelerated
wear. The code on the
– label
– of the packaging (table with
recommendations for use) is an aid
to selection
STIHL composite resin cutting wheels
are suitable, depending on the version,
for cutting the following materials:
– Asphalt
– Concrete
– Stone
– ductile cast iron pipes
– Steel
STIHL composite resin cutting wheels
are not suitable for cutting railway
tracks.
The proper selection and use of
diamond cutting wheels ensures
economical use and avoids accelerated
wear. The code on the
– label
– of the packaging (table with
recommendations for use) is an aid
to selection
STIHL diamond cutting wheels are
suitable, depending on the version, for
cutting the following materials:
– Asphalt
– Concrete
– Stone (hard stone)
– abrasive concrete
– Fresh concrete
– Clay brick
– Clay pipe
STIHL diamond cutting wheels are not
suitable for cutting metal.
Product Codes
The product code is a combination of
one to four letters and numbers:
– the letters denote the main field of
application of the cutting wheel
– the numbers denote the
performance class of the STIHL
diamond cutting wheel
Axial and radial run-out
A faultless spindle bearing of the cut-off
machine is necessary for a long service
life and efficient functioning of the
diamond cutting wheel.
Using the cutting wheel on a cut-off
machine with a faulty spindle bearing
can lead to deviations in radial and axial
run-out.
Composite resin cutting
wheels
Diamond cutting wheels
Letter Main field of
application
A Asphalt
B Concrete
BA Concrete, asphalt
S Stone (hard stone)
SB Hard stone, concrete