Need help?Do you have a question about the Stihl 410 and is the answer not in the manual?
General| Power Source | Gasoline |
|---|---|
| Engine | 2-stroke |
| Vibration Level | 3.9 m/s² |
| Sound Power Level | 109 dB(A) |
| Displacement | 66.7 cc |
| Spindle Arbor | 20 mm |
Explains symbols shown on the machine.
Explains warning and caution symbols in the text.
Notes that product design may change without manual updates.
General safety advice, user responsibility, and health considerations.
Warns against specific unsafe practices and materials.
Details required protective gear for safe operation.
Emphasizes water use for cutting wheels and dust binding.
Guidelines for supporting material and handling cut sections safely.
Details on composite resin and diamond wheels for various materials.
Identifies common errors and their remedies.
Details on composite resin wheels for various materials.
Details on diamond wheels for various materials.
Explains run-out effects and troubleshooting diamond wheels.
How to use and adjust the water control system.
Steps for cleaning and resolving low water flow issues.
Instructions for outboard and inboard mounting of the guard.
How to properly tension the V-belt using the automatic device.
Steps for safely replacing the cutting wheel.
Guidelines for mixing fuel and oil and using high-quality fuels.
Safe methods for refueling and closing the fuel cap.
Safe methods for refueling and closing the fuel cap.
Step-by-step guide for starting the engine.
Post-start actions, engine idling, and how to stop the engine.
Procedure for replacing the air filter when engine power decreases.
Standard settings and adjustments for optimal performance.
Checking and cleaning the spark arresting screen.
Standard settings and adjustments for optimal performance.
Adjusting idle speed for various conditions.
Checking and cleaning the spark arresting screen.
How to check, clean, and identify causes of spark plug fouling.
Steps for replacing a torn starter rope.
Procedures for replacing a broken rewind spring.
Detailed steps for replacing the V-belt.
How to mount the machine on the cart and its uses.
Steps for preparing the machine for storage over 3 months.
Schedule of maintenance tasks and frequencies.
Importance and procedure for checking antivibration elements.
Labeled diagram of the machine's main components.
Technical data on the engine, ignition system, and fuel.
Specifications for cutting wheels (TS 410 and TS 420).
Lists available optional accessories for the machine.
Guidance on authorized repairs and using genuine STIHL parts.
Details the warranty terms and duration for emissions components.
Owner's duties and conditions that may void the warranty.
To Next Page
