Need help?Do you have a question about the Stihl FS 410 C-M K and is the answer not in the manual?
Local safety regulations apply. Read, understand and save documents.
Explains warning and notice symbols used in the manual for safety.
Explains symbols referring to chapters within the manual.
Diagram and list of components for the brushcutter.
Mentions features available depending on the market.
Explains warning signs, safety notices, PPE, and hazard symbols.
Shows examples of deflectors and cutting attachments.
Explains symbols related to fuel tank, pump, and shutter modes.
Explains warning signs on deflectors for metal cutting attachments.
Details the intended applications for the brushcutter.
Outlines requirements and warnings for the user operating the trimmer.
Specifies required personal protective equipment and clothing.
Provides safety guidelines for the work area and bystanders.
Lists conditions for the brushcutter to be in a safe operating state.
Details safety conditions for deflectors and metal cutting attachments.
Warnings and instructions for mixing fuel and refueling the brushcutter.
Further safety advice on fuel contact, ignition, and operation.
Safety precautions and procedures during brushcutter operation.
Explains kickout and reactive forces during operation.
Safety instructions for transporting the brushcutter.
Safety warnings related to storing the brushcutter, especially concerning children.
Safety warnings before cleaning, maintenance, or repair.
Steps to ensure the brushcutter is in safe condition before operation.
Step-by-step guide for assembling the bike handle.
Instructions for installing and removing the deflector and limit stop.
Guide to mounting brush knives.
How to fit and adjust the full harness for comfortable use.
How to adjust the bike handle for user height and reach.
Instructions for balancing the brushcutter based on the cutting attachment.
Detailed instructions on mixing the correct fuel ratio for the trimmer.
Steps for safely fueling the brushcutter, including cleaning the cap.
Step-by-step guide for starting the brushcutter engine.
Instructions on how to safely stop the brushcutter engine.
Procedures for checking the throttle trigger lockout, throttle trigger, and cable adjustment.
How to set the shutter for winter and summer operation modes.
Process for calibrating the brushcutter for optimal performance.
Further details and notices regarding the calibration process.
Proper techniques for holding and controlling the brushcutter during use.
How cutting height is determined and mowing with a brush knife.
Specific techniques for thinning and using circular saw blades.
Steps to take after completing work with the brushcutter.
Instructions for safely transporting the trimmer.
Guidelines for storing the brushcutter, including child safety and fuel draining.
How to clean the brushcutter and its cooling air slots.
Instructions for cleaning the deflector and cutting attachment.
Recommended maintenance intervals for the brushcutter.
A table listing common faults, causes, and remedies for brushcutter issues.
Steps for replacing the air filter and cleaning the spark plug.
Guide on how to adjust the throttle cable.
Continues troubleshooting table for engine start and speed issues.
Technical specifications for the FS 410 C-M K model.
Technical specifications for the FS 460 C-M K model.
Details sound and vibration levels for different models and configurations.
Information regarding REACH and exhaust emission compliance.
Table showing compatible combinations of attachments, deflectors, and systems.
Information on original STIHL spare parts and accessories.
Guidance on the proper disposal of the brushcutter and its packaging.
EC Declaration of Conformity for the brushcutters.
UKCA Declaration of Conformity for the brushcutters.
To Next Page
General
