Stihl FS 410 C-M K User Manual

18.2 Replacing air filter
The air filter cannot be cleaned. The air filter
must be replaced if it is damaged or there is a
loss of engine power.
► Shut off the engine.
►
Move the choke lever to position
.
2
3
1
0000097407_001
► Take out the screws (1) and remove the filter
cover (2).
► Clean the area around the air filter (3) with a
damp cloth or a soft brush.
► Take out the air filter (3).
► Install the new air filter (3).
► Fit the filter cover (2).
► Insert screws (1) and tighten.
18.3 Cleaning the Spark Plug
► Shut off the engine.
► Allow trimmer to cool down.
2
1
4
3
0000097405_001
► Turn screw (1) counterclockwise.
► Lift the cover (2) and push it backwards.
► Pull off the spark plug boot (3).
► If the area around the spark plug (4) is soiled:
Clean the spark plug (4) with a cloth.
► Unscrew the spark plug (4).
► Clean the spark plug (4) with a cloth.
► If the spark plug (4) is corroded: Install a new
spark plug (4).
► Insert and tighten down the spark plug (4)
firmly.
► Press the spark plug boot (3) firmly home.
► Install cover (2) and tighten screw (1).
18.4 Adjusting the Throttle Cable
2
1
0000096699_002
► Press the throttle trigger (1) and keep pressed.
► Turn screw (2) clockwise until resistance is
felt.
► Turn the screw (2) clockwise through another
half-turn.
19 Specifications
19.1 STIHL FS 410 C-M K brushcut‐
ter
–
Displacement: 41.6 cm³
–
Engine power according to ISO 8893: 2.0
kW (2.7 hp) at 9,000 rpm
–
Idle speed: 2,700 rpm
–
Max. output shaft speed: 10,130 rpm
–
Approved spark plug: NGK CMR6H from
STIHL
–
Electrode gap of the spark plug: 0.5 mm
–
Dry weight without cutting attachment and
deflector: 8.5 kg
–
Length without cutting tool: 1675 mm
–
Maximum fuel tank capacity: 750 cm³ (0.75 l)
19.2 STIHL FS 460 C-M K brushcut‐
ter
–
Displacement: 45.6 cm³
–
Engine power according to ISO 8893:
2.2 kW (3.0 hp) at 9,500 rpm
–
Idle speed: 2,700 rpm
–
Max. output shaft speed: 10,130 rpm
–
Approved spark plug: NGK CMR6H from
STIHL
–
Electrode gap of the spark plug: 0.5 mm
–
Weight with empty fuel tank and without cut‐
ting attachment and deflector:
–
FS 460 C-M K: 8.5 kg
–
FS 460 C-M K with handle heating: 8.7 kg
–
Length without cutting attachment: 1675 mm
–
Maximum fuel tank capacity: 750 cm³ (0.75 l)
19 Specifications English
0458-839-0101-A 19

Stihl FS 410 C-M K Specifications

General

Brand	Stihl
Model	FS 410 C-M K
Category	Saw
Language	English