To Next PageTo Next Page
Need help?Do you have a question about the Stihl MS 241 C-M and is the answer not in the manual?
General| Idle speed | 2800 RPM |
|---|---|
| Motor type | 2-stroke motor |
| Chain pitch | 3/8 \ |
| Blade length | 350 mm |
| Product color | Black, Grey, Orange |
| Chain tensioner | Yes |
| Motor speed (max) | 10500 RPM |
| Oil tank capacity | 0.25 L |
| Fuel tank capacity | 0.39 L |
| Engine displacement | 42.6 cm³ |
| Engine power | 3.1 hp |
| Power source | Gasoline |
| Sound power level | 115 dB |
| Vibration emission | 2.9 m/s² |
| Sound pressure level | 103 dB |
Weight and Dimensions| Weight | 4500 g |
|---|
Explains symbols on the machine and text markings in the manual.
Guidelines and requirements for the chain saw operator.
Operator's physical and mental fitness for safe operation.
Recommended attire and protective gear for safe operation.
General information about the saw and basic operating guidelines.
Procedures for safe transportation.
Explanation of forces that can cause loss of control and injury.
Industry standards and features designed to reduce kickback.
Details on the chain brake's function and activation.
Information on saw chains and bars designed to reduce kickback.
Best practices to prevent kickback situations.
Explanation of pull-in and pushback kickback and how to avoid them.
Safety and techniques for branch removal and log cutting.
Precautions for tensioned logs and general felling prep.
Step-by-step procedures for felling trees safely.
Escape paths, root handling, and using sights for felling.
Conventional and open-face notch techniques.
Methods for felling large diameter trees.
Step-by-step instructions for safe fueling.
Step-by-step guide for filling the chain oil reservoir.
How to verify adequate chain lubrication.
When and how to engage the chain brake.
How to disengage the chain brake.
Procedure to test the chain brake functionality.
Recommended maintenance intervals for the chain brake.
How to prevent carburetor icing in winter.
Explanation of the master control lever positions.
How to operate the master control lever.
Proper grip and stance for starting.
Starting the saw while it is on the ground.
Starting the saw while held between the legs.
Methods for starting the saw, including specific versions.
Troubleshooting steps if the engine fails to start.
Special procedures for the initial break-in period.
Operational advice during regular use.
The importance of regular chain tension checks.
How to adjust the oil flow to the chain.
Steps for cleaning the air filter.
Information on the electronic engine management system.
Information on spark plug removal and checking.
Instructions for storing the machine for extended periods.
Details on chain pitch and correct sharpening angles.
Proper usage of the file holder.
Step-by-step guide for proper chain sharpening.
How to set the depth gauge for proper cutting.
Details on compatible guide bars and chains for reduced kickback.
Warranty information regarding federal emission controls.
STIHL's warranty coverage for the engine.
Duration of the warranty for defects.
Process for diagnosing warranty issues.
Procedures for warranty service.
