TS 410, TS 420
English
25
N Press throttle trigger lockout (1) and
throttle trigger (2) simultaneously
N Hold both triggers down
N Move the slide control (3) to START
and hold it in position too
N Release the throttle trigger, slide
control and throttle trigger lockout in
succession – starting throttle
position
N Set the choke (4) according to the
engine temperature
N Press the button (5) of the
decompression valve before each
starting procedure
N Press the bulb (6) of the fuel pump
7-10 times – even when the bulb is
still filled with fuel
Starting
N Place the cut-off machine carefully
on the ground, ensuring that the
cutting wheel cannot touch the
Starting / Stopping the
Engine
START
1
3
3
370BA020 KN
2
c If engine is cold
e if the engine is warm (even if the
engine is already running but is still
cold or if the warm engine was shut
off for less than 5 min)
f if the engine is hot (if the hot
engine was switched off for longer
than 5 min)
370BA055 KN
Choke
4
6
370BA056 KN
Choke
5
370BA023 KN
To Next Page
Loading...
