TS 410, TS 420
English
34
The cut-off machine can be mounted on
the STIHL cut-off machine cart FW 20
(special accessory) in a few easy steps.
The cut-off machine cart makes it easier
to
– repair damaged roadways
– apply roadway markings
– cut expansion joints
If the machine is to remain out of use for
approx. 3 months or more
N Drain and clean the fuel tank in a
well ventilated place
N Dispose of fuel in accordance with
the regulations and having regard
for the environment
N Run the engine until the carburetor
is dry, this helps to prevent the
carburetor diaphragms sticking
together
N Remove the abrasive wheel
N Thoroughly clean the machine
N Store machine in a safe and dry
place. Protect against unauthorized
use (e. g., by children)
Cut-off machine cart
376BA039 KN
Storing the Machine
To Next Page
Loading...
