Need help?Do you have a question about the Stihl 4282 Series and is the answer not in the manual?
Explains the electrostatic arrester function and safety precautions.
Details the control handle's setting lever and throttle trigger functions.
Step-by-step guide for starting the blower using the central control area.
Instructions on using the blower holder for secure storage and transport.
Introduction to the STIHL 4-MIX engine and its advantages.
Explains how the decompression system reduces starting effort.
Describes the all-position diaphragm carburetor and its features.
Details the microprocessor-controlled ignition system.
Information on the air filter and the two-chamber muffler.
Notes on the weight-optimised flywheel geometry.
Table listing technical specs like displacement, bore, stroke, speeds, and noise levels.
Details on carburetor settings, fuel tank capacity, and ignition module.
Details the ignition module and spark plug specifications.
Lists various nozzles and a hip belt for the blowers.
Lists lubricants, cleaning agents, and sealants for maintenance.
Identifies specific tools for servicing, like stop screws and sleeves.
Explains carburetor adjustment limits, procedures, and maintenance.
Procedure for adjusting the carburetor with limiter caps in place.
Explains the accelerator pump's role in providing quick acceleration.
Outlines procedures for checking and setting valve clearance.
Procedure for testing engine compression using a tester.
Step-by-step guide for attaching the blower tube and arrester.
Procedure for readjusting the throttle cable after assembly or use.
Instructions for correctly installing the tank vent.
Steps for removing and installing the fuel pick-up body.
Table listing repair times in minutes for various procedures.
Indicates where to find the serial number on the blower.
To Next Page
General
