EasyManua.ls Logo

Stihl AL 301 - Diagnostics and Handling; Understanding Charger LED Indicators; Safe Charger Transport and Storage

Stihl AL 301
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
0458-010-8621-A
8
English
8 LED DIAGNOSTICS
8.1 LED on the Charger
One LED shows the status of the charger. The LED can glow
green or flash red.
For more information, @ 12.
9.1 Charger
To properly transport the charger:
Disconnect the charger from the electrical outlet.
Remove the battery from the charger.
Wrap the power supply cord and attach it to the charger.
When transporting the charger in a vehicle, ensure that it
is secured in a manner that prevents turnover, impact and
damage.
10.1 Charger
To properly store the charger:
Remove the battery from the charger.
Disconnect the charger from the electrical outlet.
Wrap the power supply cord and attach it to the charger.
Store the charger indoors in a dry and secure location.
Keep it out of the reach of children and other unauthorized
persons.
8 LED DIAGNOSTICS
If the LED glows green continuously: the battery
is being charged.
or
The battery is too hot or too cold for charging. To
determine, check the LEDs on the battery. If
there is one glowing red light, allow the battery to
warm up or cool down gradually at an ambient
temperature of about 50 °F to 68 °F (10 °C to
20 °C).
If the LED flashes red: there is no electric contact
between the battery and the charger. Remove
and reinsert the battery.
or
The battery has a malfunction and must be
replaced. Check the LEDs on the battery. Do not
use or charge a battery if its LEDs indicate a
malfunction.
or
The charger has a malfunction. Have it checked
by an authorized STIHL servicing dealer before
use.
9 TRANSPORTING
10STORING
1
0000099006_001

Table of Contents

Related product manuals