49FS 130, FS 130 R
English / USA
* see “Guide to Using this Manual”
1)
STIHL recommends that this work be done by a
a STIHL servicing dealer
The following maintenance operations apply to normal operating conditions.
If working conditions are difficult (very dusty work area, etc.) or your daily working
time is longer than normal, shorten the specified intervals accordingly.
before
starting work
after finishing
work or daily
after each
refueling stop
weekly
monthly
yearly
if problem
if damaged
if required
Complete machine
Visual inspection (condition, leaks)
X X
Clean
X
Control handle Check operation
X X
Air filter
Clean
X X
Replace
X
Pickup body in fuel tank
Have checked by servicing dealer
1)
X
Have replaced by servicing dealer
1)
X X X
Fuel tank Clean
X X
Carburetor
Check idle speed
X X
Readjust idle
X
Spark plug
Readjust electrode gap
X
Replace after 100 hours of operation
Cooling inlets
Inspect
X
Clean
X
Valve clearance
Check and adjust if necessary after first
139 hours of operation
1)
X
Combustion chamber
Decarbonize
after first 139 hours of operation, then
after every 150 hours of operation
X
Spark arresting screen in muffler*
Inspect
X X
Replace
X X
All accessible screws and nuts (not
adjusting screws)
Retighten
X
To Next Page
Loading...
Need help?
General
