Stihl FS 260 C User Manual

FS 260 C, FS 360 C
English
41
Cutting attachment
Visual inspection XX
Replace X
Check tightness XX
Metal cutting attachment Sharpen XX
Safety labels Replace X
1)
STIHL recommends that this work be done by a STIHL servicing dealer
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged if required

Stihl FS 260 C Specifications

General

Fuel Capacity	0.75 L
Engine Type	2-stroke
Shaft Type	Straight
Vibration Damping	Yes
Power Output	2.0 kW
Cutting Diameter	420 mm
Starter System	Recoil