Need help?Do you have a question about the Stihl FS 260 and is the answer not in the manual?
General| Type | Brush cutter |
|---|---|
| Cordless | Yes |
| Head type | Blade |
| Handle type | U-type handle |
| Engine power | 2.7 hp |
| Product color | Black, Metallic, Orange |
| Uncertainty K | 2 m/s² |
| Rotational speed | 9000 RPM |
| Number of strokes | 2 |
| Sound power level | 114 dB |
| Fuel tank capacity | 0.75 L |
| Vibration emission | 3.8 m/s² |
| Engine displacement | 41.6 cm³ |
| Sound pressure level | 102 dB |
| Cutting diameter (max) | 480 mm |
| Power source | Gasoline |
Weight and Dimensions| Length | 1680 mm |
|---|---|
| Weight | 7500 g |
Explains warning and notice symbols used in the manual.
Guidance on appropriate protective clothing and footwear.
Safe procedures for refueling the machine.
Pre-operation checks and assembly verification.
Procedures for safely starting the engine.
General advice for safe operation and emergency stop.
Safety precautions for using metal cutting attachments.
Guidelines for performing maintenance and repairs.
Explains the risk of kickout when using metal cutting attachments.
Table showing approved combinations of attachments and guards.
Steps to mount the bike handle with its support.
How to fit the throttle cable for the FS 260 model.
Steps to adjust the handlebar position.
Guidance on selecting and mounting the correct deflector.
Instructions on using the correct guard ring for attachments.
How to block the shaft for attachment mounting/removal.
How to mount grass cutting blades and brush knives.
How to mount circular saw blades.
Instructions for mixing gasoline and oil.
Safe procedures for filling the fuel tank.
How to put on the harness for FS 260.
How to attach the FS 360 machine to the harness.
Emergency procedure for discarding the machine.
Procedures for balancing the machine for optimal use.
Procedures for balancing the machine for optimal use.
General steps for starting the engine.
How to stop the engine.
How to use transport guards for moving the unit.
Guidelines for operating the machine during its break-in period.
Steps for replacing the air filter.
How to adjust the engine's idle speed.
Adjustments for operation below +10°C.
How to check and adjust the spark plug.
Instructions for replacing nylon line in the mowing head.
Instructions for replacing cutting blades on mowing heads.
How to check and maintain the handlebar clamp area.
STIHL's recommendation for dealer servicing.
Importance of regular maintenance by owner or dealer.
Technical engine specifications for FS 260 and FS 360.
Noise and vibration data according to ISO standards.
To Next Page
