2.21.1 Risk of kickout
The risk of kickout is highest in the black area of
the blade: Do not use this area of the circular
saw blade for cutting.
There is also a risk of kickout when using the
lighter shaded areas of the blade: These areas
of the blade should only be used by experienced
operators with specialized training.
STIHL recommends that you use the non-sha‐
ded area of the circular saw blade. Always start
the cut with this area of the blade.
3 Approved Combinations of Cutting Attachment, Deflector, Limit
Stop and Harness
Cutting attachment Deflector, limit stop Carrying strap
0000-GXX-0373-A0
1
6
14
15
16
20
21
22
23
25
4
2
17
18
19
24
9
10
7
11
13
12
3
5
8
3.1 Permissible combinations
Choose the correct combination from the table
depending on the cutting tool!
English
3 Approved Combinations of Cutting Attachment, Deflector, Limit Stop and
Harn…
12 0458-743-0121-E
To Next Page
Loading...
