WARNING
For safety reasons only the cutting attachments
and deflectors and/or limit stops within one line
of the table may be combined with one another.
No other combinations are permitted because of
the risk of accidents!
3.2 Cutting attachments
3.2.1 Mowing heads
1 STIHL SuperCut 40‑2
2 STIHL AutoCut 40-2
3 STIHL AutoCut 46-2
4 STIHL TrimCut 41-2
5 STIHL DuroCut 40-4
6 STIHL PolyCut 41-3
3.2.2 Metal cutting tools
7 Grass cutting blade 230-4
(Ø 230 mm)
8 Grass cutting blade 250-32
(Ø 250 mm)
9 Grass cutting blade 250-40 Spezial
(Ø 250 mm)
10
Grass cutting blade 250-44
1)
(Ø 250 mm)
11 Grass cutting blade 255-8
(Ø 255 mm)
12 Brush knife 305-2 Spezial
(Ø 305 mm)
13 Brush knife, 300-3
(Ø 300 mm)
14 Shredder blade 270-2
(Ø 270 mm)
15 Circular saw blade 200 scratcher tooth
(Ø 200 mm)
16 Circular saw blade 200-22 chisel tooth
(4119), circular saw blade 200-22 HP chisel
tooth (4000)
17
Circular saw blade 225 scratcher tooth
(Ø 225 mm)
18
Circular saw blade 225 chisel tooth
(Ø 225 mm)
19
Carbide tipped circular saw blade 225
(Ø 225 mm)
WARNING
Non-metal grass cutting blades, brush knives,
shredder blades and circular saw blades are not
permitted.
3.3 Guards, limit stops
20 Guard for mowing heads
21 Guard for metal cutting tools, items 7 to 13
22 Guard for shredder blades
23 Limit stop for circular saw blades,
items 15, 16
24 Limit stop for circular saw blades,
items 17 to 19
3.4 Carrying strap
25 Full harness must be used
4 Mounting the Bike Handle
4.1 Mounting Bike Handle with
Swiveling Handle Support
The machine is supplied with the clamp mold‐
ings (1) mounted to the handlebar (2).
4.2 Mounting the Control Handle
1)
Approved for FS 260 and FS 360 only
4 Mounting the Bike Handle English
0458-743-0121-E 13