Page 20 Technical Information 40.2010
TI_40_2010_13_01_02.fm
9.1.3 Engine speed drops under load –
low power
Look for a fault in the fuel path,
check engine for leaks
Check air filter, replace if necessary
Troubleshooting completed
Cut-off speed =
12300 rpm?
yes no
Engine speed drops under load – low
power
Remove cutting attachment, all
mounting hardware and thrust plate.
Let the machine run three to four
times for approx. 30 s in the cut-off
range
To Next Page
Loading...
Need help?
General
