Stihl FS 87 - Sharpening Aids and Mounting Hardware; Other Special Accessories; EC Declaration of Conformity and Quality Certification; EC Declaration of Conformity

FS 87, FS 87 R
English
42
Sharpening aids for metal cutting
attachments
– Flat sharpening files for 7 to 9, 11
and 12
– File holder with round file, for 13
– Saw set, for 13
– STIHL balancer for 7 to 13
– Sharpening templates (metal or
cardboard), for 11
Mounting hardware for metal cutting
attachments
– Thrust washer
– Rider plate
– Nut
Other special accessories
– Safety glasses
– Shoulder strap
– Full harness
– Combination wrench
– Locking pin
– Carburetor screwdriver
– STIHL gear lubricant for
brushcutters
– STIHL filler nozzle for fuels
– Special resin-free lubricating oil
Contact your STIHL dealer for more
information on these and other special
accessories.
Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
ANDREAS STIHL AG & Co. KG
Badstr. 115
D-71336 Waiblingen
confirms that the machine described
below
conforms to the specifications of
Directives 2006/42/EC, 2004/108/EC
and 2000/14/EC and has been
developed and manufactured in
compliance with the following
standards:.
EN ISO 11806, EN 55012,
EN 61000
-
6
-
1
The measured and guaranteed sound
power levels were determined according
to Directive 2000/14/EC, Annex V, using
the ISO 10884 standard.
Measured sound power level
Guaranteed sound power level
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
Produktzulassung (Product Licensing)
Maintenance and Repairs EC Declaration of Conformity
Type: Brushcutter
Make: STIHL
Type: FS 87
FS 87 R
Serial identification: 4180
Displacement: 28.4 cm
3
FS 87: 104 dB(A)
FS 87 R: 104 dB(A)
FS 87: 105 dB(A)
FS 87 R: 105 dB(A)