Stihl FS56 - Fitting the Carrying Ring; Version with bike handle; Version with loop handle; Mounting the Deflector

FS 56, FS 56 R, FS 56 C, FS 56 RC
English
18
N Push the throttle cable (1) into the
retainer (2).
A factory-new machine comes with the
loop handle already mounted.
Using the Barrier Bar
A barrier bar may have to be mounted to
suit the cutting attachment you intend to
use – see "Approved Combinations of
Cutting Attachment, Deflector, Handle
and Harness".
The barrier bar comes standard with the
machine or is available as a special
accessory.
Mounting the Barrier Bar
N Take out the screws (1) and remove
along with washers (2) and nuts (3).
N Remove the loop handle (4) and
clamps (5).
002BA276 KN
2
1
1
2
Mounting the Loop Handle
002BA586 KN
002BA587 KN
4
002BA588 KN
3
5
3
5
1
2
1
2