FSA 65, FSA 85
English
13
Do not use rigid polymer blades, metal
cutting attachments or circular saw
blades on this unit.
Only the provided mowing head may be
used.
Your new power tool comes with the
loop handle mounted on the shaft, but it
must be turned and lined up to suit your
requirements.
N Loosen the star knob (1) on the
handle.
N Turn the handle to the vertical
position.
The loop handle can be adjusted to suit
the height and reach of the operator and
the application by changing
distance (A).
Recommendation: distance (A):
about 4.0 in
N Slide the handle to the required
position.
N Tighten down the star knob so that
the handle cannot be rotated on the
shaft.
Adjusting the Loop Handle
To Next Page
Loading...
