Stihl FSE 52 - 12 After Finishing Work; 13 Transporting; Transporting the Brushcutter; 14 Storing

0458-777-0121-C
17
English 12 After Finishing Work
12.1 After Finishing Work
► Switch off the trimmer and disconnect extension cable’s
coupling from trimmer’s plug.
► If the trimmer is wet: Allow the trimmer to dry.
► Clean the trimmer.
► Clean the deflector.
► Clean the cutting attachment.
13.1 Transporting the brushcutter
► Switch off the brushcutter and remove extension cable
connection from brushcutter plug.
► Adjust the shaft to its shortest length.
Carrying the brushcutter
► Carry the brushcutter in one hand properly balanced by
the shaft, with the cutting attachment behind you.
Transporting the trimmer in the car
► Secure the trimmer to prevent turnover and movement.
14.1 Storing the Trimmer
► Switch off the trimmer and disconnect extension cable’s
coupling from trimmer’s plug.
► Remove the mowing head.
► Observe the following points when storing the trimmer:
– The trimmer is out of the reach of children.
– The trimmer is clean and dry.
15.1 Cleaning the Brushcutter
► Switch off the brushcutter and remove extension cable
connection from brushcutter plug.
► Clean the brushcutter with a damp cloth.
► Clean vents with a paintbrush.
► Clean the area underneath the fanwheel with a soft brush.
15.2 Cleaning the Deflector and Cutting Attachment
► Switch off the trimmer and disconnect extension cable’s
coupling from trimmer’s plug.
► Clean the deflector and cutting attachment with a damp
cloth or a soft brush.
16.1 Maintenance Intervals
The maintenance intervals are dependent on the
environmental and operating conditions. STIHL
recommends the following maintenance intervals:
Every 12 months
► Have the trimmer checked by a STIHL servicing dealer.
17.1 Repairing the Trimmer and Cutting Attachment
The trimmer and cutting attachment cannot be repaired by
the user.
► If the trimmer or cutting attachment is damaged: Do not
use your trimmer or cutting attachment and contact your
STIHL servicing dealer for assistance.
12 After Finishing Work
13 Transporting
14 Storing
15 Cleaning
16 Maintenance
17 Repairing