0478 201 8314 C - EN
16
Closing the discharge flap:
● For transport or space-saving storage,
lift tab (2) slightly and fold away
discharge flap (1) downwards.
7.4 Attaching the upper chute
● Place upper chute (B) onto lower
chute (1).
● Fold splash guard (2) up as shown and
hold in this position.
● Screw in screws (S).
7.5 Mounting the cable clip
● Press electric cable (1) into the
designated recesses in cable clip (2) as
shown.
8.1 What material can be processed?
Both soft and hard material can be
processed with the garden shredder
GHE 355.
The chute can only be installed by a
specialist dealer using special
tools. STIHL recommends STIHL
specialist dealers.
8. Notes on working with the
machine
To Next Page
Loading...
