14
English / USA
HL 75, HL 75 K
Horizontal cut
(with angled cutter bar)
Cutting close to the ground from a
standing position, e.g. low shrubs (not
with HL 75 K).
Vertical cut
(with angled cutter bar)
Cutting without standing directly next to
hedge, e.g. flowerbed between operator
and hedge.
Vertical cut
(with straight cutter bar)
Large working radius even without
additional aids.
389BA044 KN
389BA049 KN
389BA050 KN
To Next Page
Loading...
