Stihl HL 75 - Starting the Hedge Cutter Engine; Engine Start Procedure

18
English / USA
HL 75, HL 75 K
Shoulder strap
: Put on the shoulder strap (1).
: Adjust length until the spring hook
(3) rests against your right hip.
Full harness*
: Put on the full harness (2).
: Adjust length until the spring hook
(3) rests against your right hip.
* see chapter
“Symbols Used in this Manual“
Starting
: Hold down the trigger interlock (1)
and squeeze the throttle trigger (2).
: Move the slide control (3) to the
START position.
: Now release the throttle trigger,
slide control and trigger interlock
in that order. This is the starting
throttle position.
Fitting the Harness
3
1
389BA040 KN
3
2
389BA041 KN
Starting / Stopping
the Engine
3
2
225BA003 KN
START
1
STOP