Observing the instructions in this manual
and the KombiEngine manual helps
reduce the risk
of
unnecessary wear and
damage to the power
tool.
The
power
tool must be operated,
maintained and stored with the due care
and attention described
in
these
instruction
manuals.
The
user
is responsible for all damage
caused by non-observance
of
the safety
precautions,
operating
and
maintenance
instructions. This includes in particular:
Alterations
or
modifications to the
product not approved by
STIHL.
Using tools
or
accessories which
are neither approved
or
suitable for
the product
or
are of a poor quality.
Using the product for purposes for
which it was not designed.
Using the product for sports or
competitive events.
Consequential damage caused
by
continuing to use the product with
defective components.
Maintenance Work
All the operations described in the
crapter
9n
"M~Jntena.nce
aDd.C.era.".
must be performed on a regular basis.
If
these maintenance operations cannot
be performed by the owner, they
should
be performed
by
a servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
HL-KM
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
If
these maintenance operations are not
carried out as specified, the user
assumes responsibility for any damage
that may occur. Among other parts, this
includes:
Corrosion and other consequential
damage resulting from improper
storage.
Damage to the product resulting
from the use
of
poor quality
replacement parts.
Parts Subject to Wear and
Tear
Some parts
of
the power tool (e.g.
cutting
blades) are subject to normal
wear and tear even during regular
operation in accordance with
instructions and, depending on the type
and duration
of
use, have to be replaced
in good time.
English
15