English
For periods
of
3 months or longer
• Clean
the cutting blades, check
condition and spray them with
STIHL resin solvent.
•
Fit the blade scabbard.
• If the KombiTool is removed from
the KombiEngine and stored
separately: Fit the protective cap on
the drive tube to avoid dirt getting
into the
coupling.
•
Store the machine
in
a dry, high
or
locked location - out
of
the reach
of
children and other unauthorized
persons.
14
The following intervals apply to normal
operating conditions only. If your daily
working time is longer
or
operating
conditions are
difficult (very dusty work
area, etc.), shorten the specified
intervals accordingly.
All
accessible
screws
and
nuts
• Check and retighten if necessary
(not screws and nuts on cutting
blades)
Cutting
blades
• Visual
inspection before starting
work
• Resharpen as necessary
• Replace
if
damaged
Gearbox
lubrication
• Check before starting work
• Replenish as necessary
Safety
labels
• Replace illegible
safety labels
When cutting performance and behavior
begin to deteriorate, i.e.
blades
frequently
snag on branches:
Resharpen the cutting
blades.
It
is best to have the cutting blades
resharpened by a dealer on a workshop
sharpener.
STIHL recommends a STIHL
servicing dealer.
I
~
I Do not operate
your
machine with
..:,<
dull or damaged cutting blades.
This may cause overload and will
give unsatisfactory cutting
results.
'}:1\f'
I
To Next Page
Loading...
Need help?
General
