Stihl HLA 65 - User Manual

Questions and Answers

C
Christopher RothAug 31, 2025
Why won't my Stihl HLA 65 start?
- J
  Joy GreenAug 31, 2025
  If your Stihl Trimmer isn't starting, several factors could be at play. The battery might have a low charge, so try fully recharging it. It's also possible the battery is either too hot or too cold; in that case, remove it and allow it to cool down or warm up. There may be no electrical contact between the trimmer and the battery, so remove the battery and clean the contacts in the battery compartment before refitting it. The trimmer or battery could be damp, so allow them to dry. If the cutting blades aren't running freely, spray both sides of the blades with STIHL resin solvent. In case of a malfunction, remove and reinsert the battery. If 3 LEDs continue to flash red, stop using the trimmer and seek assistance from your STIHL dealer.
C
christopher08Aug 29, 2025
Why does my Stihl HLA 65 Trimmer not start when switched on?
- A
  Antonio PhelpsAug 30, 2025
  Your Stihl Trimmer might not start due to several reasons: the battery may have a low charge (recharge it fully), the battery could be too hot or too cold (remove the battery and allow it to cool down or warm up), there may be a malfunction in the hedge trimmer (remove the battery, clean contacts, and refit it), the cutting blades may not run freely (spray both sides with STIHL resin solvent), the hedge trimmer might be too hot (remove the battery and allow it to cool down), there could be a malfunction in the battery (remove and reinsert the battery), there might be no electrical contact (remove the battery and clean contacts), or the trimmer or battery could be damp (allow them to dry).
G
George GarciaAug 28, 2025
What to do if my Stihl Trimmer cuts out during operation?
- R
  Ryan BurnsAug 28, 2025
  If your Stihl Trimmer cuts out during operation, it could be due to the battery or machine's electronics overheating; remove the battery and allow both to cool down. Another cause could be an electrical or electromagnetic malfunction, in which case you should remove and refit the battery.
M
michaelsavageAug 26, 2025
What to do if my Stihl Saw switches off during operation?
- I
  igonzalezAug 27, 2025
  If your Stihl Saw switches off during operation, it could be due to the battery or machine electronics overheating. Remove the battery from the machine and allow both the battery and the machine to cool off. It may also be caused by an electrical or electromagnetic malfunction, in which case you should remove the battery and then reinsert it.