0458-185-8621-A
35
English
22 Inspection and Maintenance
► Only sharpen the cutting edges. Do not file blunt
projecting parts of the cutting attachment, or the cutting
blade guard. Make sure your sharpening stroke matches
the sharpening angle, @ 24.3.
► Turn the hedge trimmer over.
► Use a whetstone to remove any burrs from the cutting
edges. Remove as little material as possible.
► After sharpening, wipe away filing or grinding dust with a
dry or slightly dampened cloth and then spray the cutting
blades with a resin solvent, such as STIHL Resin
Remover and Lubricant.
If you make a warranty claim for a component which has not
been serviced or maintained properly, coverage may be
denied.
NOTICE
Operating the machine with dull or damaged cutting blades
may overload the motor. Keeping the cutting blades sharp
helps maintain cutting performance and the expected life of
the product.
To Next Page
Loading...
Need help?
General
