HSA 65, HSA 85
English
39
During Operation
The green light emitting diodes indicate
the state of charge by lighting up and
flashing.
If the light emitting diodes on the battery
flash or light up red – see "If the red light
emitting diodes light up / flash".
If the red light emitting diodes light
up / flash
3901BA016 KN
80 - 100 %
60 - 80 %
40 - 60 %
20 - 40 %
0 - 20 %
1 light emitting diode
lights up red:
Battery is too
hot
1) 2)
/cold
1)
1)
During charging process: Charging
process starts automatically after
the battery has cooled down /
warmed up.
4 light emitting diodes
flash red:
Battery faulty
3)
3 light emitting diodes
light up red:
Power tool is too
hot – allow it to
cool down.
3 light emitting diodes
flash red:
Power tool
faulty – have
checked by
servicing
dealer
4)
3901BA017 KN
2)
During operation: Power tool cuts
out – allow battery to cool down; it
may be necessary to take the
battery out of the power tool for this
purpose.
3)
Battery is faulty and must be
replaced.
4)
STIHL recommends a STIHL
servicing dealer.
To Next Page
Loading...
