HSA 65, HSA 85
English
46
Battery
Charger
Cutting attachment
Weight
Noise and Vibration Data
Noise and vibration data are determined
on the basis of the rated maximum
speed.
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib/
Sound pressure level L
peq
to
DIN EN 60745-2-15
Sound power level L
peq
to
DIN EN 60745-2-15
Vibration measurement a
hv,eq
to
DINEN60745-2-15
The K-value in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
the sound pressure level and sound
power level; the K-value in accordance
with Directive 2006/42/EC is 2.0 m/s
2
for the vibration measurement.
Carrying STIHL Rechargeable
Batteries
STIHL batteries comply with the
requirements laid down in UN-Manual
ST/SG/AC.10/11/Rev.3/Part III,
Subsection 38.3. No further conditions
have to be fulfilled to carry STIHL
batteries to the power tool's operating
site.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
Specifications
AP 80
Model: Lithium-Ion
Voltage: 36 V
Capacity: 2.2 Ah
AL 100
Mains voltage: 220 - 240 V
Rated current: 0.6 A
Frequency: 50 Hz
Power consumption: 75 W
Charging current: 1.6 A
Charge time (for AP 80):
– up to 80% capacity: 70 min
– up to 100% capacity: 100 min
Insulation: II
AL 300
Mains voltage: 220 - 240 V
Rated current: 2 A
Frequency: 50 Hz
Power consumption: 320 W
Charging current: 6.5 A
Charge time (for AP 80):
– up to 80% capacity: 25 min
– up to 100% capacity: 50 min
Insulation: II
Tooth spacing: 30 mm
Stroke rate (off load): 3,000/min
Cutting length:
– HSA 65: 500 mm
– HSA 85: 620 mm
Sharpening angle:
– HSA 65: 41°
– HSA 85: 45°
With battery and cutting attachment,
without blade scabbard
HSA 65: 4.6 kg
HSA 85: 4.8 kg
HSA 65: 83 dB(A)
HSA 85: 83 dB(A)
HSA 65: 94 dB(A)
HSA 85: 94 dB(A)
Handle, left Handle, right
HSA 65: 2.2 m/s
2
1.6 m/s
2
HSA 85: 2.2 m/s
2
1.7 m/s
2