HSA 65, HSA 85
English
43
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
Always remove the battery before carrying out any work on the power tool.
before starting work
after finishing work or daily
weekly
monthly
every 12 months
if problem
if damaged
if required
Complete machine
Visual inspection (condition) X
Clean X
Controls (trigger switch, switch lever)
Check operation X
Clean XX
Two-hand control
Check function – blades must quickly
come to a standstill when the trigger
switch and/or switch lever is released
X
Cooling inlets
Visual inspection X
Clean X
All accessible screws and nuts Retighten X
Battery Visual inspection XXX
Cutting blades
Visual inspection X
Clean
1)
X
Sharpen XX
Safety labels Replace X
1)
Spray with STIHL resin solvent after cleaning