Stihl KM 56 RC User Manual

KM 56 R, KM 56 RC
English
7
The following STIHL KombiTools may
be attached to the KombiEngine:
The new machine is delivered with the
loop handle pre-assembled on the unit.
Using the Barrier Bar
The barrier bar comes as a standard
with the machine and must be mounted
to the loop handle.
Mounting the Barrier Bar
N Take out the screws (1) and remove
them along with washers (2) and
nuts (3)
N Remove the loop handle (4) and
clamps (5)
Approved KombiTools
KombiTool
1)
The included barrier bar on the loop
handle must be used - see also
"Mounting the Loop Handle”
Intended use
FS
-
KM Scythe with mowing
head
FS
-
KM
1)
Scythe with grass
cutting blade
FSB
-
KM Scythe with mowing
head
HL
-
KM 145° Long reach hedge
trimmer, adjustable
HL
-
KM 0° Long-reach hedge
trimmer
FH
-
KM 145° Scrub cutter
BG
-
KM Blower
HT
-
KM Pole pruner
BF
-
KM Cultivator
FCB
-
KM Edger
FCS
-
KM Edger
SP
-
KM Harvesters
KB
-
KM Bristle brush
KW-KM Sweeper drum
assembly
Mounting the Loop Handle
002BA586 KN
002BA587 KN
4
002BA588 KN
3
5
3
5
1
2
1
2

Stihl KM 56 RC Specifications

General

Displacement	27.2 cm³
Fuel Capacity	0.33 l
Power Source	Gasoline
Idle Speed	2, 800 rpm
Fuel Tank Capacity	0.33 l
Engine Power	0.8 kW
Engine	2-stroke
Ignition System	Electronic
Starter System	STIHL ErgoStart (E)