Stihl MS 151 TC User Manual

26.6.3 Saw chains 1/4" P
Picco Micro 3 (71 PM3) Type 3670
Pitch: 1/4” P (6.35 mm)
Drive link gauge: 1.1 mm
26.6.4 Chain sprocket
8-tooth for 1/4" (spur chain sprocket)
Max. chain speed according to
ISO 11681:
22.5 m/s
Chain speed at maximum power:
16.9 m/s
26.7 Noise‑ and Vibration Data
For further details on compliance with Vibration
Directive 2002/44/EC visit www.stihl.com/vib.
26.7.1 Sound pressure level L
p
to ISO 22868
96 dB(A)
26.7.2 Sound power level L
w
to ISO 22868
109 dB(A)
26.7.3 Vibration measurement a
hv, eq
to
ISO 22867
Handle, left
4.9 m/s
2
Handle, right:
4.9 m/s
2
The K‑factor in accordance with Directive
2006/42/EC is 2.0 dB(A) for the sound pressure
level and sound power level; the K‑factor in
accordance with Directive 2006/42/EC is
2.0 m/s
2
for the vibration level.
26.8 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation (EC) No. 1907/2006 see
www.stihl.com/reach.
26.9 Exhaust Emissions
The CO
2
value measured in the EU type approval
procedure is specified at www.stihl.com/co2.
The measured CO
2
value was determined on a
representative engine in accordance with a
standardized test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this instruction manual. The
type approval expires if the engine is modified in
any way.
27 Special Accessories
–
Spiked bumper
–
File holder with round file
–
Filing gauge
–
Reference gauges
–
STIHL lubricating grease
–
STIHL filler nozzle for fuel – helps avoid spills
and overfilling during refueling
–
STIHL filler nozzle for chain oil – helps avoid
spills and overfilling
Contact your STIHL dealer for more information
on these and other special accessories.
27.1 Mounting the Spiked Bumper
2
2011BA044 KN
1
► Secure the spiked bumper (1) to the engine
housing with the two screws (2).
28 Ordering Spare Parts
Please enter your saw model, serial number as
well as the part numbers of the guide bar and
saw chain in the spaces provided. This will make
re-ordering simpler.
The guide bar and saw chain are subject to nor‐
mal wear and tear. When purchasing these
parts, always quote the saw model, the part
numbers and names of the parts.
Model
Serial number
Guide bar part number
Chain part number
29 Maintenance and Repairs
Users of this machine may only carry out the
maintenance and service work described in this
user manual. All other repairs must be carried
out by a servicing dealer.
27 Special Accessories English
0458-508-8321-B 31

Stihl MS 151 TC Specifications

General

Sound Pressure Level	96 dB(A)
Power Output	1.1 kW
Weight	2.6 kg
Bar Length	30 cm (12")
Vibration Level (Left/Right)	3.5/3.5 m/s²
Engine Displacement	23.6 cm³