Stihl MS 231

111MS 231, MS 231 C, MS 251, MS 251 C
No. Description Part No. Application Rem.
19 Flange 5910 855 4201 Sealing exhaust port for leakage test
20 Torque wrench 5910 890 0302 0.5 to 18 Nm
21 Torque wrench 5910 890 0312 6 to 80 Nm
22 Installing tool 10 5910 890 2210 Installing hookless snap rings in piston
– Sleeve 5910 893 1707 Sleeve for installing tool 10
23 Screwdriver 5910 890 2306 Adjusting the carburetor
24 Screwdriver bit, T 27 x 150 5910 890 2400 IS-P screws
25 Hook 5910 890 2800 Detaching springs on clutch shoes
26 Assembly stand 5910 890 3101 Holding saw for repairs
27 Puller 5910 890 4400 Removing oil seals
- Jaws (No. 3.1) 0000 893 3706 Removing oil seals
- Jaws (No. 6) 0000 893 3711 Removing oil seals
28 Puller 5910 890 4502 Pull off the limiter cap.
29 Stud puller M8 5910 893 0501 Removing bar mounting studs
30 Puller 5910 893 0801 Removing flywheel
31 Setting disk 5910 893 6600 Add-on for screwdriver (adjusting
carburetor)
32 Hook 5910 893 8800 Removing pickup body
Remarks:
1) Use for releasing only.
All manuals and user guides at all-guides.com