Stihl MS 462 C-M R User Manual

19.5 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
19.6 Exhaust Emissions
The CO
2
value measured in the EU type approval
procedure is specified at www.stihl.com/co2.
The measured CO
2
value was determined on a
representative engine in accordance with a
standardized test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this instruction manual. The
type approval expires if the engine is modified in
any way.
20 Bar and Chain Combina‐
tions
20.1 STIHL MS 462 C-M R Chain‐
saw
The following guide bars and saw chains may be
mounted:
Guide bar: Rollomatic Super
•
Pitch: 3/8“
•
Groove width: 1.6 mm
•
Length: 50 cm
•
Number of nose sprocket teeth: 11
Chain: 36 RDR (Type 3944)
•
Pitch: 3/8“
•
Drive link gauge: 1.6 mm
•
Number of drive links: 72
The cutting length of a guide bar depends on the
chainsaw and the saw chain being used. Actual
cutting length may be less than the specified
length
21 Spare Parts and Accesso‐
ries
21.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
22 Disposal
22.1 Disposing of Chainsaw
Information on disposal is available from STIHL
servicing dealers.
► Dispose of the chainsaw, guide bar, saw
chain, fuel mix, gasoline, two-stroke engine oil,
accessories and packaging in accordance with
local regulations and environmental require‐
ments.
23 EC Declaration of Con‐
formity
23.1 STIHL MS 462 C-M R Chain‐
saw
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declares under our sole responsibility that
–
Category: chainsaw
–
Manufacturer's brand: STIHL
–
Model: MS 462 C-M R
–
Serial number: 1142
–
Displacement: 72.2 cm³
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion: EN ISO 11681‑1, EN 55012 and
EN 61000‑6‑1.
The EC type examination pursuant to Directive
2006/42/EC Art. 12.3(b) was carried out by
DPLF, Deutsche Prüf- und Zertifizierungsstelle
für Land- und Forsttechnik GbR (NB 0363),
Spremberger Straße 1, 64823 Groß‑Umstadt,
Germany
–
Certification number K‑EG‑2016/7987
20 Bar and Chain Combinations English
0458-787-0121-B. VA0.M20. 25

Stihl MS 462 C-M R Specifications

General

Brand	Stihl
Model	MS 462 C-M R
Category	Saw
Language	English