RE 108, RE 118, RE 128 PLUS
English
7
Holder for high-pressure hose
N Position the holder (1) for the high-
pressure hose on the adjuster and
fasten it with the screws (2)
RE 128 PLUS
Crank for hose reel
N Engage crank handle in hose reel
Holder for flat hose cassette
A flat hose cassette is available as
special accessory.
The holder for the flat hose cassette is
included and can be installed as
needed.
N Slide the locking ring (1) over the
spray attachment holder
N Fasten the holder (2) for the flat
hose cassette with the included
screws
Height adjustable handle
N Press button (1) and pull handle (2)
upward as far as it will go
N Release button and pull/push on the
handle again until the telescopic
shafts engage
Transport handle (RE 118, 128 PLUS
only)
The machine can be carried using the
transport handle.
To Next Page
Loading...
