Stihl RE 150 - Assembling the Pressure Washer

7.2.2 Inserting the handle
2
1
0000-GXX-9865-A0
► Press locking knob (1) and insert handle (2).
► Release locking knob (1) and insert handle (2)
until it audibly engages.
7.3 Fitting and removing the high-
pressure hose
7.3.1 Connecting the high-pressure hose
1
2
0000-GXX-9877-A0
► Push the coupling (1) onto the connector (2).
The coupling (1) audibly engages.
► If it is difficult to slide the coupling (1) onto the
connector: Grease the gasket on the connec‐
tor (2) with a fitting grease.
7.3.2 Removing the high-pressure hose
1
0000-GXX-9878-A0
► Pull off coupling (1)
7.4 Attaching and removing the
spray gun
7.4.1 Attaching the spray gun
0000-GXX-5095-A0
1
2
► Push connector (1) into spray gun (2).
The connector (1) audibly engages.
► If the connector cannot be pushed easily into
the spray gun (2): Grease the gasket on the
connector (1) with grease for fittings.
7.4.2 Removing the spray gun
0000-GXX-5096-A0
1
2
► Press and hold the locking lever (1).
► Pull out connector (2).
7.5 Attaching and removing the
spray lance
7.5.1 Attaching the spray lance
0000-GXX-4350-A0
1
2
► Push spray lance (1) into spray gun (2).
► Twist the spray lance (1) until it engages.
► If the spray lance (1) cannot be pushed easily
into the spray gun (2): Grease the gasket on
the spray lance (1) with grease for fittings.
English 7 Assembling the pressure washer
12 0458-603-0121-B