RE 361, RE 361 PLUS, RE 461, RE 461 PLUS, RE 471 PLUS
English
43
N Turn the master switch to 0 and turn
off the water supply
N Actuate the spray gun until water
only drips from the spray head (the
machine is now depressurized)
N Release trigger
N Press the safety latch (1) in the
direction of the arrow – the spray
gun is locked to prevent inadvertent
operation
N Unplug the power plug from the
socket
N Disconnect water intake hose from
machine and water supply
After use
N Roll the high-pressure hose and
power cable up on the brackets
provided for this purpose – see
"Main parts of the machine"
Store the machine in a dry room where it
is protected from frost.
If protection from frost cannot be
guaranteed, draw glycol-based
antifreeze – like that used in motor
vehicles – into the pump:
N Insert water intake hose in container
with antifreeze
N Insert spray gun without spray lance
in the same container
N Switch on the machine with the
spray gun open
N Actuate the spray gun until a
uniform jet emerges
N Keep leftover antifreeze in a sealed
container
Switching Off
Storing the Machine
To Next Page
Loading...
