To Next Page
E
Eric SchmittAug 6, 2025
What to do if my Stihl RE 125.0 X does not start when squeezing the spray gun trigger?
- JJohn TravisAug 6, 2025
If your Stihl Pressure Washer doesn't start when you squeeze the spray gun trigger, there are a couple of things you can check: * First, make sure the mains plug of the connecting cable or extension cord is properly plugged in. * Second, check the circuit-breaker (fuse) or the residual current circuit breaker. If it has tripped, look for the cause of the tripping, fix it, and then re-engage the breaker. Also, try switching off other devices connected to the same circuit to prevent electrical overload.
General
