–
Max. water supply pressure (p in max.): 1 MPa
(10 bar)
–
Max. water throughput (Q max.): 8.3 l/min
(500 l/h)
–
Minimum water throughput (Q min.): 7 l/min
(420 l/h)
–
Max. suction lift: 0.5 m
–
Max. water temperature in pressure mode
(t in max): 40 °C
–
Max. water temperature in suction mode:
20 °C
sample inspection
–
Length: 470 mm
–
Width: 350 mm
–
Maximum height: 896 mm
–
Minimum height: 420 mm
–
Length of high-pressure hose: 8 m
–
Weight (m) with accessory attached: 20 kg
Parameters dependent on pressure have been
measured at an inlet pressure of 0.3 MPa (3
bar).
18.3 Extension Cords
If an extension cord is used, it must have a
ground wire and the wire gage of its conductors
must meet the following minimum requirements –
depending on the line voltage and length of the
extension cord:
If rated voltage on the rating label is 220V to
240V:
–
Cord length up to 20 m: AWG 15 / 1.5 mm²
–
Cord length 20 m up to 50 m: AWG 13 /
2.5 mm²
If rated voltage on the rating label is 100 V to
127 V:
–
Cord length up to 10 m: AWG 14 / 2.0 mm²
–
Cord length 10 m up to 30 m: AWG 12 /
3.5 mm²
18.4 Sound and vibration levels,
RE 125.0 X, RE 125.0
The K-value for the sound pressure level is
2 dB(A). The K-value for the sound power level is
2 dB(A). The K-value for vibration level is 2 m/s².
–
Sound pressure level L
pA
measured according
to EN 60335‑2‑79: 68 dB(A)
–
Sound power level L
wA
measured according to
EN 60335-2-79: 80 dB(A)
–
Vibration level a
hd
measured in accordance
with EN 60335‑2‑79, fan-jet nozzle: ≤ 2.5 m/s².
For information on compliance with Employers'
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
18.5 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
19 Spare Parts and Accesso‐
ries
19.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
20 Disposal
20.1 Disposing of the pressure
washer
Contact the local authorities or your STIHL
dealer for information on disposal.
Improper disposal can be harmful to health and
pollute the environment.
► Take STIHL products including packaging to a
suitable collection point for recycling in accord‐
ance with local regulations.
► Do not dispose with domestic waste.
21 EC Declaration of Con‐
formity
21.1 STIHL RE 125.0 X; RE 125.0
high-pressure washer
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declare under our sole responsibility that
English
19 Spare Parts and Accessories
20 0458-016-0101-A
To Next Page
Loading...
Need help?
General
