Stihl RE 125.0 X - Specifications

Fault Cause Remedy
The nozzle of the spraying set is
blocked.
► Clean nozzle of spraying set.
Connections with
pressure washer,
high-pressure hose,
spray gun or spray
lance are stiff.
The gaskets of the connections have
not been greased.
►
Lubricate the gaskets. 17.2
17.2 Lubricating the Gaskets
1
1
1
1
0000099937_001
► Lubricate the gaskets (1) with grease suitable
for faucets and valves.
18 Specifications
18.1 STIHL RE 125.0 X high-pres‐
sure washer
Version 230 V to 240 V / 50 Hz
–
Fuse ("C" or "K" characteristic): 10 A
–
Power consumption: (EU) 2019/1781 §2(2) (j):
2.3 kW
–
Maximum permitted network impedance: 0.42
Ohm
–
Protection class: I
–
Degree of protection: IPX5
–
Working pressure (p): 13 MPa (130 bar)
–
Max. pressure (p max.): 17 MPa (170 bar)
–
Max. water supply pressure (p in max.): 1 MPa
(10 bar)
–
Max. water throughput (Q max.): 8.3 l/min
(500 l/h)
–
Minimum water throughput (Q min.): 7.1 l/min
(425 l/h)
–
Max. suction lift: 0.5 m
–
Max. water temperature in pressure mode
(t in max): 40 °C
–
Max. water temperature in suction mode:
20 °C
sample inspection
–
Length: 428 mm
–
Width: 249 mm
–
Height: 305 mm
–
Length of high-pressure hose: 8 m
–
Weight (m) with accessory attached: 16.4 kg
Parameters dependent on pressure have been
measured at an inlet pressure of 0.3 MPa (3
bar).
18.2 STIHL RE 125.0 high-pressure
washer
Version 127 V / 60 Hz
–
Fuse (characteristic "C" or "K"): 15 A
–
Power consumption: 1.6 kW
–
Maximum permitted network impedance: 0.42
Ohm
–
Protection class: I
–
Degree of protection: IPX5
–
Working pressure (p): 9.5 MPa (95 bar)
–
Max. permissible pressure (p max.): 14 MPa
(140 bar)
–
Max. water supply pressure (p in max.): 1 MPa
(10 bar)
–
Max. water throughput (Q max.): 7.3 l/min
(440 l/h)
–
Minimum water throughput (Q min.): 5.9 l/min
(355 l/h)
–
Max. suction lift: 0.5 m
–
Max. water temperature in pressure mode
(t in max): 40 °C
–
Max. water temperature in suction mode:
20 °C
sample inspection
–
Length: 470 mm
–
Width: 350 mm
–
Maximum height: 896 mm
–
Minimum height: 420 mm
–
Length of high-pressure hose: 8 m
–
Weight (m) with accessory attached: 10.0 kg
Version 220 V to 230 V / 50 Hz
–
Fuse ("C" or "K" characteristic): 10 A
–
Power consumption: (EU) 2019/1781 §2(2) (j):
2.3 kW
–
Maximum permitted network impedance: 0.42
Ohm
–
Protection class: I
–
Degree of protection: IPX5
–
Working pressure (p): 13.5 MPa (135 bar)
–
Max. pressure (p max.): 17 MPa (170 bar)
18 Specifications English
0458-016-0101-A 19