RE 361, RE 361 PLUS, RE 461, RE 461 PLUS, RE 471 PLUS
English
35
Never unplug the power plug by pulling
on the cord: always grip the plug itself.
Maintenance and repairs
– Use only high-quality spare parts. in
order to avoid the risk of accidents
or damage to the machine. Contact
a servicing dealer if in doubt.
– To avoid risks, work on the machine
(e. g., power cord replacement)
may only be carried out by qualified
electricians.
Clean plastic parts with a cloth. Harsh
detergents can damage the plastic.
Cleaning ventilation slots in motor
housing as needed.
The machine must be serviced regularly.
Do not attempt any maintenance or
repair work not described in the
Instruction Manual. All other work should
be carried out by a servicing dealer.
STIHL recommends the use of genuine
STIHL spare parts. Such parts have
been optimized for the machine and the
user's requirements.
STIHL recommends that maintenance
and repair work be carried out only by
authorized STIHL dealers. STIHL
dealers receive regular training and are
supplied with technical information.
N Pull back and hold the coupling (1)
N Push the spray lance (2) into the
mount on the spray gun, or pull it out
to remove the spray gun,
respectively
N Release the coupling (1)
Machines without hose reel
Connecting the high-pressure hose
N Push high-pressure hose onto the
connector (1)
N Attach union nut (2) and screw it on
and tighten by hand
Disconnect the high-pressure hose
N Unscrew the union nut (2)
N Pull high-pressure hose off of
connector (1)
Machines with hose reel
The high-pressure hose is already
connected.
Warning!
Before starting any work
on the machine: always
disconnect the machine
from the mains power
supply.
Fitting, removing spray lance
Fitting, removing high-
pressure hose
To Next Page
Loading...
