0478-131-9838-A
16
English
12 Operating the Lawn Mower
11.3 Checking the Blade Position
► Switch the lawn mower off, pull out the activation key and
remove the battery.
► Upend the lawn mower, @ 16.1.
► Turn one blade so that it is parallel to the ground. The
second blade turns also.
► Check the blades for correct position relative to each other
– In the basic position, one blade (1) is parallel to the
ground.
– The second blade (2) is at a 90° angle to the first blade.
► If the blades are not in the correct position relative to each
other: cease using the lawn mower and consult a STIHL
specialist dealer.
12.1 Holding and Guiding the Lawn Mower
► Hold the handlebar with both hands so that the thumbs
enclose the handlebar.
12.2 Setting the Cutting Height
Eight cutting heights can be set:
– 25 mm = position 1
– 35 mm = position 2
– 45 mm = position 3
– 55 mm = position 4
– 65 mm = position 5
– 75 mm = position 6
– 90 mm = position 7
– 100 mm = position 8
The positions are indicated on the lawn mower.
The cutting height is set individually at all wheels. The
setting must be the same for all wheels.
12 Operating the Lawn Mower
To Next Page
Loading...
