EasyManua.ls Logo

Stihl SH 56 C-E - Engine Starting and Stopping Control; Engine Starting Steps; Fuel Pump and Lever Adjustments; Choke Knob Adjustment

Stihl SH 56 C-E
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BG 56, BG 56 C, BG 66, BG 66 C, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
English
12
Starting the engine
N Observe safety precautions.
N Press the fuel pump bulb (1) at least
five times – even if the bulb is filled
with fuel.
Adjusting the setting lever
BG 86, SH 86 only
N To start, move the setting lever to
the run position F
The setting lever (2) allows the throttle
trigger (3) to be locked in the full throttle
position during operation.
Adjusting the choke knob
If the engine is cold
N Set the choke knob to g
If the engine is warm
N Set the choke knob to
<
Also use this setting if the engine has
been running but is still cold.
Cranking
N Place the unit on the ground.
N Make sure you have a firm footing:
Hold the unit firmly with your right
hand on the housing and press
down.
N Hold the starter grip with your left
hand.
Version with Easy2Start
N Pull the starter grip steadily.
Version without Easy2Start
N Pull the starter grip slowly until you
feel it engage and then give it a brisk
strong pull.
Starting / Stopping the
Engine
1
296BA009 KN
295BA069 KN
296BA007 KN
3
295BA067 KN
295BA068 KN
Do not pull out the starter rope all
the way – it might otherwise
break.
296BA006 KN

Related product manuals