BGE 61, BGE 71, BGE 81, SHE 71, SHE 81
English
29
N Line up the recesses.
N Push the elbow (5) into the blower
housing stub (6) as far as stop.
N Push the union nut (7) over the
blower housing stub (6) and turn it in
the direction of the arrow as far as
the stop. You will hear the safety
switch being activated.
Assembling the Suction Tube
N Line up the arrows on the suction
tube and extension tube. Push
together and lock in position.
Mounting the Suction Tube
N Switch off the motor.
N Press down the lock button (1) by
inserting a suitable tool through the
opening.
N Push lug (arrow) against blower
housing and hold it there.
N Rotate the intake screen (2) in the
direction of arrow as far as the stop
and lift it away.
N Line up the arrows (3).
N Push the suction tube into the intake
opening as far as the stop.
N Push the handle (4) over the intake
opening.
N Line up the arrows (3 and 5).
N Rotate the handle (4) in direction of
arrow until the lever (6) engages
audibly on the blower housing.
Lock button (arrow) must engage in
position.
To Next Page
Loading...
