Stihl Smart Connector - Specifications

[SNR_Complete]
8
English 9 Troubleshooting Guide
9.1 Smart Connector
9 Troubleshooting Guide
Condition Cause Remedy
The LED in the Smart
Connector does not
glow green when the
battery is inserted.
Battery is fully depleted. ► Replace the battery.
The LED in the Smart
Connector is flashing
red.
Battery power is low. ► Replace the battery.
The Smart Connector
does not measure
runtime correctly.
Battery is low or fully
depleted.
► Replace the battery.
The Smart Connector is
not mounted properly.
► Re-mount the Smart Connector in the manner and in the locations
specified in this instruction manual or the STIHL App.
The signal range may vary depending on ambient conditions.