Stihl SR 450 - Page 21

SR 430, SR 450
English
19
Bayonet fuel cap
Screw-type tank cap
Open the bayonet fuel filler cap
WARNING
Never use a tool to open the bayonet
catch. This could damage the cap and
cause fuel to leak out.
N Press the cap down with your hand
as far as possible, turn it
counterclockwise (approx. 1/8 turn)
and remove it.
Fueling
Take care not to spill fuel while fueling
and do not overfill the tank.
Close the bayonet fuel filler cap
N Fit the cap and turn it until it
engages in the bayonet mount.
N Press the cap down with your hand
as far as possible and turn it
clockwise (approx. 1/8 turn) until it
engages completely.
Opening the threaded filler cap
N Turn the cap counterclockwise until
it can be removed from the tank
opening.
N Remove the filler cap.
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank.
Closing the threaded filler cap
N Position cap.
N Turn the cap clockwise as far as it
will go and tighten it as securely as
possible by hand.
0002BA091 KN
0002BA092 KN
0002BA014 KN
2.
1.
0002BA015 KN
2.
1.
002BA447 KN
002BA448 KN